Vauman Group

SYNOLAC - ALKYD RESINS

Long Oil Alkyds
Product Code Oil Type Oil
Length % 		Modifications Polyol
Type		 % Non
Volatiles+/-
2%		 Volatiles Acid Value
Max
mg KOH/gm		 Viscosity @ 30°C Suggested Uses
Poise Seconds
Synolac 2001 Linseed 65 -- Penta 100/60 MTO 10   100-120 (50%MT)

High quality paints and air drying enamels with excellent gloss.
Synolac 2001/1 Linseed 65 -- Penta 100 MTO 10   50-60 (50%MT)

High quality printing inks, silk, screen inks, letter press inks & offset inks.
Synolac 3002 Safflower 64 -- Penta 100/60 MTO 10   90-100 (50%MT)

High quality non yellowing synthetic enamels & roller coatings.
Synolac 3001/1 Safflower 65 -- Penta 100 MTO 10   20-24 (50%MT)

High quality printing inks for paper & tin with excellent colour retention
Synolac 3002 Semidrying 65 -- Penta 100/60 MTO 10   100-120 (50%MT)

High quality synthetic enamel & roller coatings having excellent no tolerance & good colour retention property.
Synolac 3002/1 Semidrying 65 -- Penta 100 MTO 10   25-30 (50%MT)

High quality tin printing inks & silk screen printing inks.
Synolac 4002 DCO 65 -- Penta 100/60 MTO 15   100-120 (50%MT)

Low cost decorative enamels.
Synolac 5001/3 Castor 62 -- Glycerol 100 Zylene 15 1-15 (50% Xylene) --

Plasticizing alkyd for N.C. based coating
 

SYNOLAC - ALKYD RESINS

Medium Oil Alkyds
Product Code Oil Type Oil
Length % 		Modifications Polyol
Type		 % Non
Volatiles+/-
2%		 Volatiles Acid Value
Max
mg KOH/gm		 Viscosity @ 30°C Suggested Uses
Poise Seconds
Synolac 2002 Synolac 52 -- Glycerol/ Penta 100/60 MT 1-   60-80 (40% MT)

Low cost industrial and architectural finishes.
Synolac 2004 Semidrying 55 -- Glycerol/ Penta 52 MT 20   130-150 (40% MT)

Low cost air drying/stoving enamels and under coats.
Synolac 3006 Semidrying 55 -- Glycerol/ Penta 50 MT 20   130-150 (40% MT)

Air drying enamels, primers, Being rosinfree it is also recommended for white enamels, roller coating enamels and stoving finishes.
Synolac 4003 DCO 55 -- Glycerol 60 MT 20   250-300 (50% MT)

Low cost air drying/stoving enamels and under coats.
Synolac 4006 DCO 52 -- Penta 52 MT 20   160-180 (Straight)

Roller coating enamels and over print varnishes.
Synolac 9002 Synolac 55 -- Glycerol 60 Aromax 20 40-50 (Straight) 250-300 (50% Aromax)

Roller coatings and tube coatings
 

SYNOLAC - ALKYD RESINS

Short Oil Alkyds
Product Code Oil Type Oil
Length % 		Modifications Polyol
Type		 % Non
Volatiles+/-
2%		 Volatiles Acid Value
Max
mg KOH/gm		 Viscosity @ 30°C Suggested Uses
Poise Seconds
Synolac 4004 DCO 42 -- Glycerol 70 Xylene 25 14-20 (50% Xylene) --

Stoving enamels, primers, N.C. Paints, lacquers & primers
Synolac 4005 DCO 40 -- Glycerol 70 Xylene 15 3-6 (50% Xylene) --

Industrial stoving enamels & lacquers.
Synolac 5001 Coconut 32 -- Glycerol 70 Xylene 25 6-9 (50% Xylene) --

Stoving enamels with excellent colour retention, N.C. lacquers and roller coating varnishes
Synolac 5006 Coconut 24 -- Glycerol 70 Xylene 20 8-12 (50% Xylene) --

N.C. Paints, primers & laquers, can also be used for stoving enamels primers & lacquers.
 

SYNOLAC - ALKYD RESINS

Short Oil Rosinated Alkyds
Product Code Oil Type Oil
Length % 		Modifications Polyol
Type		 % Non
Volatiles+/-
2%		 Volatiles Acid Value
Max
mg KOH/gm		 Viscosity @ 30°C Suggested Uses
Poise Seconds
Synolac 6001 Linseed 40 Rosin Penta 52 MT 25   130-150 (40% Xylent)

Low cost air drying / stoving paints and primers.
Synolac 6003 DCO 45 Rosin Penta 52 MT 20   120-150 (40% MT)

Low cost air drying / stoving paints and primers.
Synolac 6006X Linseed 40 Rosin Penta 52 Xylene 30 10-15 (straight)  

Industrial varnishes & Hammer tone finishes
Synolac 6007 DCO 42 Rosin Penta 50 MT 25   100-120 (40% MT)

Air drying / stoving paints & primers.
 

SYNOLAC - ALKYD RESINS

Speciality
Product Code Oil Type Oil
Length % 		Modifications Polyol
Type		 % Non
Volatiles+/-
2%		 Volatiles Acid Value
Max
mg KOH/gm		 Viscosity @ 30°C Suggested Uses
Poise Seconds
Synolac 72S Linolic 48   Penta 55 MT / Xylene 10 40-55  

Vehicle refinishes, fast drying industrial finishes and low bake forced drying type of products.
Synolac 78W Linolic 55   Penta 52 MT 10 23-30  

Vehicle refinishes & fast drying industrial finishes.
Synolac 82X Linolic 45   Penta 55 Xylene 10 25-35  

Vehicle refinishes, fast drying industrial finishes and low bake forced drying type of products.
Synolac 92X Linolic 28   Penta 55 Xylene 15 40-50  

Vehicle refinishes, fast drying industrial finishes & heavy duty primers.
Synolac 655W (Urethane Alkyd) Linolic 61 Isocyanate Penta 55 MT 3 17-30  

Decorative glossy & semi glossy finishes, single pack wood finishes & floor enamels.
Synolac 9003X DCO / Soya 45 Acrylic Glycerol 52 Xylene 25 10-15  

High quality fast drying enamels.
Synolac 9005X Mixed Fatty acids 23 Acrylic Glycerol 52 Xylene 15 30-40  

Very rapid drying industrial enamels and wood sealers.
Synolac 9006 Mixed Fatty acids 44 Acrylic Glycerol / Penta 55 Aromax 15 20-30  

Roller coating enamels & Varnishes with excellent tooling property.
 

CRAY HARD - Rosin Modified Phenolic Resins
Product Code Type Melting Point°C (Capillary) Max A.V. mg KOH/gm Viscosity @ 30°C Suggested Uses
Cray Hard 7001 Oil Soluble 125-135 25 10-15 Poise (60% Xylene)

Excellent drying, weather resistance, good hardness in photo gravure inks, letter press and offset inks.
Cray Hard 7002 Oil Soluble 150-160 25 1-1.5 Poise (50% Tolune)

Quick set, gloss offset inks, web offset and heat set inks.
Cray Hard 7003 Oil Soluble 115-125 25 50-60 Seconds (50% M.T.O.)

For synthetic enamels, Good M.T.O. tolerance
 

CRAY HARD - Rosin Modified Maleic Resins
Product Code Type Melting Point°C (Capillary) Max A.V. mg KOH/gm Viscosity @ 30°C Suggested Uses
Cray Hard 8001 Spirit Soluble 125-135 130-145 10-15 Poise (50% in Methanol)

Paper coatings, Picture varnishes and liquid inks.
Cray Hard 8002 Oil Soluble (NC Compatible) 110-120 30-40 18-22 Seconds (50% Toluene)

NC Lacquers and Flexo Graphic inks.
Cray Hard 8003 Oil Soluble 120-130 30 7-9 Poise (60% Xylene)

Compatible with alkyds and (used in high gloss synthetic enamels. Recommended for general inks for good gloss.
 

OIL FREE POLYESTER RESIN
Product Code Avg. % Solid +/- Solvent Max Acid Value mg KOH/gm Viscosity @ 25°C (Straight) Suggested Uses
Syn 154 S 62 C-9 / Butyl cellosolve 10 10-15

High quality Coil Coatings & Metal decoration.
Syn 1529 S 80 Butyl Acetate 10 90-130

High solids Polyester for 2K PU and stoving systems.
 

SYNOCRYL - ACRYLIC RESINS (Thermoplastics and Thermosetting)
Product Code Polymer Type Avg. % Solid +/- 2% Solvent Viscosity Poise @ 25°C (Straight) Suggested Uses
Scl 873S Thermoplastic 45 Xylene / C-9 1:2 10-20

Thermoplastic coating for with excellent colour gloss retention for metal, wood, plastic & fabrics, Provides good adhesion on bare metal
Scl 874S Thermoplastic 40 C-9 10-15

Higher quality flexible air drying finishes with excellent colour & gloss retention for metal, wood, plastic & fabrics substrate.
Scl 874 X Thermoplastic 45 Xylene 10-15

Highly durable colour & gloss retention paint, lacquers in combination with N.C. vinyl, CAB, Also recommended in wood lacquers.
Scl 875W Thermoplastic 52 MTO / Xylene 9:1 5-10

MTO soluble acrylic coatings for plastic metal & wood substrate also used for improving adhesion in Alkyds.
Scl 9122X Thermoplastic 40 Xylene 9-15

As temporary binder for decoration of ceramics, porcelains, also used for diamond cutting tools.
Scl 623S Thermoplastic 58 Xylene / Butanol 1:1 9-13

N.C. based lacquers & enamels with good colour gloss retention.
Scl 826S Thermosetting 60 Xylene / Butanol 1:1 9-13

Low temperature curing stoving finishes for Auto OEM body & high quality domestic appliances.
Scl 839S Thermosetting 60 C-9 / Butanol 3:1 30-60

Self curing flexible acrylamide resin for caps & closures.
 

SYNOCURE - ACRYLIC RESINS (for Two Pack Polyurethane Coatings)
Product Code Avg. % Solid +/- 2% Solvent Viscosity Poise @ 25°C (Straight) Hydroxyl Eq. Wt. Solid Basis Suggested Uses
Scu 851S 60 Xylene / Butyl-acetate (2:1) 20-30 380

For high quality vehicle refinishing & for high performance industrial coatings.
Scu 857S 60 Xylene / Cellosolve acetate (3:2) 35-50 1400

Very economical high flexibility coating requiring very low polyiso- cyanate curing agents, Suitable for application on plastics.
Scu 862X 55 Xylene 25-35 1100

High performance PU coating with low polyisocyanate requirement
Scu 863S 58 Xylene / Cellosolve acetate (4:1) 23-35 700

Fast drying economic coatings with allround performance
Scu 864S 60 C-9 18-30 1140

High durable PU coatings with low polyisocyanate requirement
Scu 865SD 70 EEP / Cellosolve acetate (1:1) 40-60 550

Coating with excellent exterior durability with high application solids.
Scu 867S 58 Xylene / Cellosolve acetate (1:3) 35-50 600

High performance PU coating with excellent durability and all round performance.
Scu 868S 60 Xylene / Cellosolve acetate (2:1) 30-50 800

PU coating with excellent flexibility and weathering property, can also be used to plasticize coatings based on Syn 862 & Syn 867
Scu 869X 51 Xylene 25-50 1100

Excepentionaly fast drying coating with long pot life for use is wood lacquers & high performance coatings for metal.
 

CRAYAMID POLYAMIDE RESINS (Liquid Reactable Type)
Product Code Avg. % Solids +/- 2% Amin Value mgKOH/gm Hydrogen Equivalent Wt* Viscosity @ 40°C Poise Max Colour Suggested Uses
PRS Gardner
Crayamid 115 100 205-220 240 450-550 3 1/2 11

General purpose epoxy polyamide Coatings with Excellent corrosion resistance.
Crayamid 115X 70 205-220 240 12-18 3 1/2 11

Crayamid 115 in Xylene Solvent
Crayamid 125 100 280-320 130 80-120 3 1/2 11

High build epoxy polyamide coatings and epoxy based adhesives.
Crayamid 140 100 350-400 95 35-40 3 1/2 11

Epoxy based coatings, laminates & Adhesives. Solvent less epoxy polyamide coatings.
Crayamid 160 100 350-380 95 3-6 @ 25°C 3 1/2 11

General potting, encapsulation, laminating and flooring compounds.
Crayamid 280X 75 320-325 140 20-40 @ 25°C 3 1/2 11

75% NV in Xylene, Polyamide adduct requiring no induction period.
 

CRAYAMID POLYAMIDE RESINS (Solid Thermoplastic Type)
Product Code Softening Point (B & R) Max. A.V. mgKOH/gm Viscosity 35% in Tol / Butanol (1:1) @25°C Max. Amine.V mgKOH/gm Max Colour Suggested Uses
PRS Gardner
Crayamid 933 105-115 2-7 1-1.4 2 1/2 3 1/2 9

Flexographic & Gravure inks for treated polyethylene, cellophane, coated alluminium foil etc.
Crayamid 725 125-135 2-7 0.3-0.5 3 3 1/2 10

Flexographic & Gravure alcohol reducible inks with good N.C. compatibility and high softening point which increases resistance to blocking

Crayamid 791 107-117 2-7 0.3-0.5 3 3 1/2 10

Flexographic & Gravure alcohol soluble inks with good water resistance and high softening point with deep freeze Resistance.
 

UNSATURATED POLYESTER RESIN PRODUCT GUIDE
  Physical and Chemical Properties Mechanical Non-Reinforced Comments
  Internal Test Method Gel Test data    
Grade Code Viscosity Non-Volatile Method Gel Time Cure Time Peak Exotherm Temp Flexurual Strength Flexurual Modulus Tensil Strength Elongation at Break HDT Suggested Uses
General Purpose 6301 500-800 64-68 1 10-15 20-30 145-165 75 3.7 50 2.2 70

General Purpose Medium Viscosity Flexible Orthopthalic Resin.
GP Putty Grade 6302 500-800 64-68 2 10-15 15-20 150-170          

General Purpose Orthopthalic Putty Resin.
Button Grade 6336 600-900 68-72 1 15-25 25-35 160-180 122 4.6 75 2.5 74

Button grade medium viscosity Orthopthalic Resin.
Superior Boat Grade GP 6344 500-800 64-68 1 10-20 20-30 150-170 78 3.9 56 2.6 63

Superior grade GP Orthopthalic Resin for enhanced performance.
Marble 6350 500-800 64-68 1 10-20 20-30 150-170 100 3.7 65 2.5 70

Synthetic Marble low reactive polyester Orthopthalic Resin for enhance performance.
Rooflite 6366 150-250 56-60 1 10-20 30-40 155-175 80 4 56 2.5 63

Roof Light low viscosity light stabilized Polyester Resin for Vetrotex & other mats.
Rooflite 6367 150-250 56-60 1 10-20 30-40 155-175 80 4 56 2.5 63

Roof Light low viscosity light stabilized Polyester resin for OC mats.
Rooflite 6368 150-200 56-60 1 20-30 35-45 155-175 80 4 56 2.5 63

Economic version of low viscosity Rooflite resin

Iso-phthalic 6394 600-900 56-60 1 13-18 18-25 190-210 110 3.6 60 2.54.5 95

Iso-phthalic medium viscosity polyester resin

Vinyl Ester 6401 350-500 53-57 3 10-20 18-28 150-160 120 3.5 76 2.5 105

Epoxy modified Vinyl Ester for superior chemical, corrosion & temperature resistance.
RTM 6502 200-300 56-61 1 10-15 18-25 180-200 115 4.8 76   74 RTM low viscosity Ortho-pthalic polyester resin
Putty 6528 700-900 64-68 4 4-6 6-12 90-110       2.2  

Medium viscosity flexible polyester resin for high quality putty.
SMC 6601 1100-1400 68-72 5 7-9 10-15 185-195 75 3.7 50 2.5 70

Ortho Resin for SMC & Hot press moulding.
Pultrusion 6701 800-1200 68-72 5 4-7 10-15 160-180 120 4.5 75 3.5 74

For marking General Purpose Pultruded items.
Pultrusion 6703 800-1200 63-67 5 5-8 10-15 190-210 110 3.5 75 8.1 90

Iso resin for making Chemical Resistant Pultrusion items.
Pultrusion 6704 350-550 63-67 1 5-9 30-40 150-170 100 2.8 59   60

For making with parts with high impact resistant
                           

1) Using 2% Cobalt Solution with 1% active metal content and 2% MEKP at room temperature.

2) Using 8 gm of 50% BPO paste & 2.5 ml of 8% DMA per 100 gm resin at 30°C.

3) Using 1.5% of 1% Cobalt, MEKP and 8% DMA Solution.

4) Using 4% Benzoyl peroxide of 50% activity at 25°C

5) Using SPI method (2% Benzoyl peroxide of 50% activity at 82°C)

6) Standard Packing size 35 Kgs. & 225 Kgs.

7) Uncatalysed, standard cure polyester products have a usage life of three month from date of manufacturing when store at 23°C or in a closed factory sealed, opaque container and out of direct sunlight. The usage life is cut in half for every 12°C over 23°C.